2024 MakeX Starter : Arena and frame
This kit includes the map, frame, and items required to build the arena for 2024 MakeX Starter All-Core Journey. It can be used for offline training and competitions.
Parts List:
| 4x Board A | 4× Board B | 2× Board C | 2× Board D |
| 2× Square board A | 6× Square board B | 8× Square board C | 15× Rotor board A |
| 6× Rotor board B | 4× Square beam 0808 - 072 | 4× Slide beam - 016 | 14× Slide beam - 064 |
| 20x Square beam 2424 - 088 | 7× Slide beam - 112 | 2× Slide beam - 128 | 2× Slide beam - 256 |
| 4× Beam - 108 | 2× Beam - 124 | 4× Fixing plate | 4× Slider |
| 1× Double-sided Fabric Tape | 2× Hinge 40*24 | 12× Flat beam 1126 | 24× Flat beam lock |
| 12 x Octagonal pillar - 45 | 24x Octagonal pillar cover | 4× Bracket 3*3 | 6× Bracket 3*8 |
| 2× Rudder bracket | 2× U-shaped bracket | 150× Magnetic stud M4 | 150× Magnetic disc |
| 16× Rectangular nut M4 | 100× Square magnetic plate | 64× Hex nut M4 | 24× Hex locknut M4 |
| 120× Screw M4*8 | 70× Screw M4*10 | 40× Screw M4*14 | 16× Screw M4*16 |
| 30× Screw M4*22 | 15× Headless screw M3*5 | 16× Roll | 10× Shaft collar |
| 3× Shaft 4*128 | 2× Shaft 4*50 | 50× Brass stud M4*16 | 10× Brass stud M4*25 |
| 40× Hex stud M4*32 | 25× Plastic ring M4*7*10 | 10× Plastic ring M4*7*3 | 15× Plastic ring M4*7*2 |
| 10× Plastic rivet - R4060 | 1× Hex key 1.5 mm | 1× Hex Allen key T30 | 1× Screwdriver hex 2.5 mm & cross |
| 1× Wrench | 2× Rubber magnet sticker | 5× Red cube 70 mm | 5× Blue cube 70 mm |
| 3× Yellow cube 70 mm | 1× Yellow cube (with K) 70 mm | 3× Sticker | 1× Map |
| 2× Red ring 40*70*20 | 2× Yellow ring 40*70*20 | 2× Blue ring 40*70*20 | 3× MakeX blue ball |
| 3× MakeX red ball | 6× Rubber magnet |
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.